Nov 10, 2026 – “What are CTCSS tones and why are they used?”

Good evening. This is W1UT and tonight’s topic will about “What are CTCSS tones and why are they used?”.

Most repeaters these days use what are called CTCSS or sometimes called Private Line (PL) tones. The only repeater I know of here in Utah that does not require a CTCSS tone is the 146.76 repeater on Lake Mtn. This is one of oldest repeaters in the west and early on they decided to not use a CTCSS tone to bring up the repeater mainly because in the early days of FM most radios did not have tones built into the radio. Had the Lake Mtn repeater been modified to require a CTCSS for access, many older hams would not be able to use the repeater. Since the mid to late 80s all new FM radios come equipped with CTCSS tones, so this is no longer an issue.

CTCSS stands for “Continuous Tone-Coded Squelch System” which is an analog means of generating a sub-audible tone to signal a repeater to turn itself on. If a ham has not setup his radio to transmit a specific sub-audible tone, then the distant repeater cannot be accessed. There are some 50 CTCSS tones that can be programmed into your radio from 67.0 Hz to 254.1 Hz.

So why add a CTCSS tone to a repeater? The main reason is to minimize interference from other distant repeaters using the same frequency. The state FCC frequency coordinator is tasked with minimizing interference between repeaters by selecting frequency pairs that are far enough apart that interference is unlikely to happen. A CTCSS tone is also recommended to further minimize interference.

Another purpose for the use of CTCSS tones is for repeaters (actually the repeater controller) to transmit a sub-audible tone which allows anyone listening to the repeater to program their radio to decode this tone which if not received his radio will not activate. This can be helpful especially in environments with high static, noise or receiver-produced intermod.

A CTCSS tone can also be used to hide the presence of interfering signals such as receiver-produced intermodulation. Receivers with poor specifications—such as scanners or low-cost mobile radios—cannot reject the strong signals present in urban environments. The interference will still be present and may block the receiver, but the decoder will prevent it from being heard. It will still degrade system performance but the user will not have to hear the noises produced by receiving the interference.

CTCSS is commonly used in VHF and UHF amateur radio operations for this purpose. Wideband and extremely sensitive radios are common in the amateur radio field, which imposes limits on achievable intermodulation and adjacent-channel performance.

Finally CTCSS tones do not provide privacy or security, but serve only to reduce annoying interference by other users or other noise sources; a receiver with the tone squelch turned off will hear everything on the channel.